1-Bit DAC (24-bit Resolution)
High-bit format for higher resolution and lower distortion from CD The 24-bit DAC re-quantizes the 16-bit digital signal to convert it to the 24-bit format. This process compensates for the conversion error that is created during recording. The result: you get a sound that is closer to the original sound, an analog signal with finer resolution.
:: Click for detailed 1-Bit DAC (24-bit Resolution) information |
|
1-Bit Pulse D/A
A type of digital to analog converter whose output is restricted to only two values. Unlike a multi-bit D/A, in which each bit possesses its own corresponding output voltage, a 1-bit D/A's output voltage is expressed by means of the axis, i.e. PWM or PDM. |
|
1 Ohm Stability
Refers to an amplifier's ability to operate when wired to a speaker load that offers a 1 ohm impedance. |
|
3D Hybrid Sensor
(Mostly Used in Navigational Systems )When connected to the speed pulse wire of the car, it allows one to monitor their travels in all three dimensions: Height (up / down), Speed (distance), Direction (left / right). The sensor acting as an inclometer senses and corrects distance errors, providing near perfect accuracy. |
|
40 Hz EQ
An equalization circuit which provides up to 12dB of gain at 40Hz. |
|
4 Volt Preout
A preamp output type whose voltage level reaches up to 4 volts at full volume. |
|
60 Degree Install
This unit contains a CD mechanism that can be installed up to 60 degrees from horizontal with normal operation. |
|
8fs
(8 times over sampling)
This unit contains a CD mechanism that can be installed up to 60 degrees from horizontal with normal operation. |
|
